Home / All / Radiator R-OK MAX

Radiator R-OK MAX

COD N-L232
measure (mm): 200 x 430 x 35
weight: 1.680 kg

It originated, as the name suggests, with the advent of the OK classes in 2016. A compact, lighter radiator was needed that would marry the philosophy of the OK/OKJ classes, namely simplification in order to reduce the weight and costs of karts. New Line’s response to this requirement is called R-OK MAX.

Product Description

With the arrival of the OK classes, the total weight of a kart plus driver has been reduced compared to previous KF classes. That is the reason New-Line Racing also wanted to contribute by producing the R-OK MAX, a radiator capable of meeting the cooling needs of the new CIK-FIA approved non-shifter karts, while keeping the weight of the cooling system to a minimum. To do so, compared to a regular R , a “light” support was developed and produced that allows the radiator to be adjusted/tilted in any position in all situations.

While RS, model might represent the ideal radiator for KF classes, the ideal choice for the OK class is the new R-OK model. This also has a positive effect on the economic front, since the list price of the R-OK is lower than the RS. Not only that, but New Line, to continue trying to minimize the costs for kart drivers, has chosen to also equip the R-OK model with an air shield curtain as standard, thereby offering a special price for the “radiator + curtain” combination.

When to use:

icona primavera Spring (expect KZ)

Summer (expect KZ)

Autumn

Winter

You may also like…

COD N-L116
weight: 0.300 kg

Specific for summer use, the plexiglass air shield has a dual function. When closed, it helps the engine to reach its operating temperature, while when open it acts as a conveyor.

COD N-L126 GIALLO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L125 ARANCIO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L113 NERO
weight: 0.330 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L121 ARANCIO
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L125 NATURALE
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L157
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium. It differs from the R version thanks to the toothed pulley, which is specific to frames with a toothed belt (HTD) instead of O-Rings.

COD N-L129 BLU
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L211 ROSSO
weight: 0.220 kg

COD N-L121 ROSSO
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L126 BLU
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L129 GIALLO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L125 GIALLO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L121 NATURALE
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L135
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium.

COD N-L126 ROSSO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L129 ROSSO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L113 BLU
weight: 0.330 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L101
weight: 0.630 kg

New-Line’s Supplementary model is mounted as an additional radiator to the main one (e.g.: R MAX, RS MAX, Big MAX, etc.). It serves to increase the overall effectiveness of engine cooling process in extreme climatic conditions.

Used for ensuring the optimisation of air-flow, the rear deflector is capable of diverting the hot air from the rear tyre and facilitating its outflow from behind the radiator.

COD N-L205
weight: 5 g

COD N-L211 NERO
weight: 0.220 kg

COD N-L211 BLU
weight: 0.220 kg

COD N-L128
weight: 7 g

COD N-L126 VERDE
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L125 ROSSO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 BLU
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 NERO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L121 BLU
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L129 ARANCIO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L113 ROSSO
weight: 0.330 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L133
weight: 40 g

A specific part for housing the water temperature probe (of any brand, thanks to its standard thread), it features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

COD N-L129 VERDE
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L121 NERO
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L126 NERO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L129 NERO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L138
measure (mm): 1,000
weight: 10 g

misure: 1,000

Can also be installed with the axle already mounted because they are heat-weldable.

COD N-L121 ORO
weight: 0.520 kg

Made of aluminium and machined from solid, R radiator supports have an overall width of 20 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK, they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L134
weight: 26 g

A specific part used when joining two silicone tubes. It features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.