Home / All / Radiator CORSA MAX

Radiator CORSA MAX

COD N-L234
measure (mm): 275 x 430 x 35
weight: 2.300 kg

The CORSA radiator is developed to take advantage of the new MAX radiator core. Compared to the standard core, the MAX increases the cooling capacity up to 10% and allows, for a given size, up to 20% decrease in total weight.

Product Description

The CORSA radiator is developed to take advantage of the new MAX radiator core. Compared to the standard core, the MAX increases the cooling capacity up to 10% and allows, for a given size, up to 20% decrease in total weight. These features have made it possible to create a compact and light radiator that causes minimal aerodynamic drag and which, in terms of size, places itself between the DOUBLE MAX and the NEW models.
Another notable feature of the CORSA MAX is the internal layout of its core which is split into two sections in series, thus forcing water to flow inside the radiator for a longer period of time: this increases the heat exchanged between water and air and improves cooling compared to a traditional radiator of the same size. This special double-pass internal configuration made it necessary to equip the radiator with a pressure-relief hole for an easier venting.
The small size of the CORSA MAX radiator offers a considerable advantage both when it comes to installation, even on karts that mount bulky fairings or large-size seats, and in terms of improved cooling of the brake system and the left rear tire, now hit by a less amount of dirty air.
Further optimization of the air flows is guaranteed by the rear deflector fitted as standard, which is able to channel hot air away from the rear tire and improves outflow from the rear of the radiator. The combination of all these elements makes the CORSA MAX radiator suitable for use in hot weather conditions.

When to use:

icona primavera Spring (except OK)

Summer

Autumn (except OK)

You may also like…

COD N-L211 ROSSO
weight: 0.220 kg

COD N-L114 ROSSO
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L114 BLU
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L125 ROSSO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L205
weight: 5 g

COD N-L126 GIALLO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L125 ARANCIO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L133
weight: 40 g

A specific part for housing the water temperature probe (of any brand, thanks to its standard thread), it features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L129 ROSSO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L126 ROSSO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L129 ARANCIO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L125 BLU
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L101
weight: 0.630 kg

New-Line’s Supplementary model is mounted as an additional radiator to the main one (e.g.: R MAX, RS MAX, Big MAX, etc.). It serves to increase the overall effectiveness of engine cooling process in extreme climatic conditions.

COD N-L129 GIALLO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L128
weight: 7 g

COD N-L126 VERDE
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L126 BLU
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L135
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium.

COD N-L125 NATURALE
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L134
weight: 26 g

A specific part used when joining two silicone tubes. It features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

COD N-L211 NERO
weight: 0.220 kg

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L125 NERO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L129 VERDE
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L125 GIALLO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L126 NERO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L129 NERO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L211 BLU
weight: 0.220 kg

COD N-L138
measure (mm): 1,000
weight: 10 g

misure: 1,000

Can also be installed with the axle already mounted because they are heat-weldable.

COD N-L114 NERO
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L129 BLU
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L157
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium. It differs from the R version thanks to the toothed pulley, which is specific to frames with a toothed belt (HTD) instead of O-Rings.