Home / All / Radiator RS-S1 MAX

Radiator RS-S1 MAX

COD N-L107
measure (mm): 240 x 430 x 40
weight: 2.600 kg

A model based on the RS MAX model, but specific for use combined with Honda shifter engines, which are widely used in the United States of America.

Product Description

Identical to the RS MAX, the RS-S1 MAX features a water outlet, positioned on the bottom side, directed towards the front of the kart. This decision was made to facilitate the installation of the radiator on karts with Honda shifter engines, which are common in the US.

The width of the radiator core, equal to 24 cm, allows this model to offer outstanding cooling performance even in particularly hot weather. In addition, it is one of the most sought after models technically. This is proved by the curved design of the water inlet (and outlet), capable of improving the distribution of water over the entire width of the radiator core, in order to best exploit its cooling capacity.

Beyond its technical and performance features, the RS-S1 model clearly represents the attention that New Line Racing places on listening to the different needs of the market, trying to meet the demands of all customers throughout the world.

In extreme weather conditions it can be combined with the Supplementary model.

When to use:

icona primavera Spring

Summer

Autumn

Winter

You may also like…

COD N-L101
weight: 0.630 kg

New-Line’s Supplementary model is mounted as an additional radiator to the main one (e.g.: R MAX, RS MAX, Big MAX, etc.). It serves to increase the overall effectiveness of engine cooling process in extreme climatic conditions.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L126 BLU
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L129 GIALLO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L114 NERO
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L211 ROSSO
weight: 0.220 kg

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

COD N-L117
weight: 0.330 kg

Specific for summer use, the plexiglass air shield has a dual function. When closed, it helps the engine to reach its operating temperature, while when open it acts as a conveyor.

COD N-L128
weight: 7 g

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L126 VERDE
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L114 ROSSO
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L211 BLU
weight: 0.220 kg

COD N-L125 ARANCIO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L129 VERDE
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L211 NERO
weight: 0.220 kg

COD N-L157
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium. It differs from the R version thanks to the toothed pulley, which is specific to frames with a toothed belt (HTD) instead of O-Rings.

COD N-L129 NERO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L129 ROSSO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L125 ROSSO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 BLU
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L126 GIALLO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L205
weight: 5 g

COD N-L133
weight: 40 g

A specific part for housing the water temperature probe (of any brand, thanks to its standard thread), it features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator.

COD N-L125 NATURALE
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L126 NERO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.

COD N-L125 NERO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L125 GIALLO
weight: 48 g

Machined from solid, New Line Racing’s aluminium cap has been optimised to withstand greater pressure than the traditional plastic models. The outlet for the exhaust pipe can be rotated to facilitate the fixing of the recovery tank.

COD N-L129 ARANCIO
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

COD N-L135
weight: 0.345 kg

A pump machined from solid, made of aluminium, designed and produced to ensure an ideal flow of water when used in conjunction with New-Line Racing radiators. It features an internal rotor that is also machined from solid and made of aluminium.

COD N-L114 BLU
weight: 0.350 kg

It’s the simplest, lightest and most reliable solution to allow the driver to regulate the airflow through the radiator at any time. Made of materials resistant to petrol, oils and to the operating temperatures of the radiator itself, moves vertically thanks to a pulley system and is easy to install thanks to specific double ended screws.

COD N-L134
weight: 26 g

A specific part used when joining two silicone tubes. It features an inner diameter equal to and not less than the internal diameter of the silicone tubes themselves, so as not to impede the flow of water.

COD N-L138
measure (mm): 1,000
weight: 10 g

misure: 1,000

Can also be installed with the axle already mounted because they are heat-weldable.

COD N-L129 BLU
weight: 0.420 kg

Thanks to the greater water flow they can generate, these silicone pipes optimise the cooling system’s performance. The double curve allows a single tube to complete the flow from the engine to the radiator.

Made of aluminium and machined from solid, these radiator supports have an overall width of 24 cm. Thanks to the telescopic structure, they allow the radiator to be positioned and tilted precisely. Unlike the Support radiator for OK-LIGHT / R-OK they are “Y-shaped” to ensure greater stability of the radiator. 

Used for ensuring the optimisation of air-flow, the rear deflector is capable of diverting the hot air from the rear tyre and facilitating its outflow from behind the radiator.

COD N-L126 ROSSO
weight: 50 g

Compact and functional, this liquid recovery tank is easy to install.